Skip to content
October 20, 2026
TVG Report

TVG Report

Engineering-first robotics, AI, maker hardware, STEM, and creator technology reporting

  • Home
  • Tech News
  • Maker Culture
  • Robotics & AI
  • STEM Lab
  • NXT Bench
Main Menu

Author: TVG Editorial Team

BME280 Forced Mode: Wait for Conversion Instead of Reading on a Guess
STEM Lab

BME280 Forced Mode: Wait for Conversion Instead of Reading on a Guess

October 11, 2026October 11, 2026 - by TVG Editorial Team - Leave a Comment

A robust BME280 forced-mode loop starts one conversion, waits for the status register’s measuring bit to clear, then reads the compensated result. Fixed delays hide oversampling-dependent timing.

BME280 Forced Mode: Wait for Conversion Instead of Reading on a Guess Read More
CodeQL 2.27.2 Changes macOS Build Support and Rewrites Go Control Flow
Tech News

CodeQL 2.27.2 Changes macOS Build Support and Rewrites Go Control Flow

October 11, 2026October 11, 2026 - by TVG Editorial Team - Leave a Comment

CodeQL 2.27.2 adds language models and queries, but two migration issues deserve attention: traced compiled-language builds on newer macOS/Xcode combinations and a rewritten Go CFG API.

CodeQL 2.27.2 Changes macOS Build Support and Rewrites Go Control Flow Read More
SPH0645 I²S Audio Looks Wrong? Align the 18-Bit Sample Before Changing Gain
Maker Culture

SPH0645 I²S Audio Looks Wrong? Align the 18-Bit Sample Before Changing Gain

October 9, 2026October 9, 2026 - by TVG Editorial Team - Leave a Comment

The SPH0645 sends 18 bits of microphone precision inside a 24-bit I²S word. Wrong slot, edge or sign alignment can look like low level, clipping or noise.

SPH0645 I²S Audio Looks Wrong? Align the 18-Bit Sample Before Changing Gain Read More
APDS9960 Gesture Interrupts: Drain the FIFO Before Clearing the Event
STEM Lab

APDS9960 Gesture Interrupts: Drain the FIFO Before Clearing the Event

October 9, 2026October 9, 2026 - by TVG Editorial Team - Leave a Comment

APDS9960 gesture events can repeat or disappear when firmware clears the interrupt without consuming the gesture FIFO. Read status, drain valid datasets, then finish the engine sequence.

APDS9960 Gesture Interrupts: Drain the FIFO Before Clearing the Event Read More
Arduino UNO Q Turns One: Its Linux–MCU Split Is Now the Defining Feature
Tech News

Arduino UNO Q Turns One: Its Linux–MCU Split Is Now the Defining Feature

October 9, 2026October 9, 2026 - by TVG Editorial Team - Leave a Comment

Arduino marked one year of UNO Q on October 8. Current documentation shows why the board differs from a conventional UNO: Debian runs beside a Zephyr-based real-time MCU.

Arduino UNO Q Turns One: Its Linux–MCU Split Is Now the Defining Feature Read More
BNO055 Calibration Status: Save Offsets Only After All Four Values Reach 3
Maker Culture

BNO055 Calibration Status: Save Offsets Only After All Four Values Reach 3

October 8, 2026October 8, 2026 - by TVG Editorial Team - Leave a Comment

BNO055 calibration is four separate 0–3 states. Save offsets only after system, gyroscope, accelerometer and magnetometer all report 3 in the intended operating mode.

BNO055 Calibration Status: Save Offsets Only After All Four Values Reach 3 Read More
AS5600 Angle Jumps? Check Magnet Status Before Filtering the Data
STEM Lab

AS5600 Angle Jumps? Check Magnet Status Before Filtering the Data

October 8, 2026October 8, 2026 - by TVG Editorial Team - Leave a Comment

AS5600 angle problems often start with magnet geometry, not software noise: check detection, too-weak and too-strong status before filtering 12-bit readings.

AS5600 Angle Jumps? Check Magnet Status Before Filtering the Data Read More
Raspberry Pi Desktop Returns to 64-Bit PCs and Intel Macs
Tech News

Raspberry Pi Desktop Returns to 64-Bit PCs and Intel Macs

October 8, 2026October 8, 2026 - by TVG Editorial Team - Leave a Comment

Raspberry Pi Desktop for PC and Mac now uses 64-bit Debian Trixie, supports persistent USB boot and installation, and includes Raspberry Pi Connect.

Raspberry Pi Desktop Returns to 64-Bit PCs and Intel Macs Read More
RFM69 Antenna Length: Start With Quarter-Wave Math, Then Tune the Installation
Maker Culture

RFM69 Antenna Length: Start With Quarter-Wave Math, Then Tune the Installation

October 7, 2026October 7, 2026 - by TVG Editorial Team - Leave a Comment

A free-space quarter-wave is about 17.3 cm at 433 MHz and 8.2 cm at 915 MHz, but feed point, ground, enclosure and legal band limits still determine the installed RFM69 antenna.

RFM69 Antenna Length: Start With Quarter-Wave Math, Then Tune the Installation Read More
Polymaker PolyDryer Box XL Review Preview: A 3 kg Spool Vault, Not a Standalone Dryer
Maker Culture

Polymaker PolyDryer Box XL Review Preview: A 3 kg Spool Vault, Not a Standalone Dryer

October 7, 2026October 7, 2026 - by TVG Editorial Team - Leave a Comment

The PolyDryer Box XL targets 3 kg spool storage with sealed filament feed-through, humidity monitoring, and optional Dry Dock support. TVG evaluates the engineering promise, ecosystem costs, and tests that matter.

Polymaker PolyDryer Box XL Review Preview: A 3 kg Spool Vault, Not a Standalone Dryer Read More

Posts pagination

Previous 1 2 3 4 … 52 Next

Latest on X

@TVGReport
TVG Report review-policy graphic explaining supplied products, independent conclusions, and verified results

Wonder whether a supplied review unit changes the verdict? You're right to ask. TVG Report discloses supplied products, keeps conclusions independent, and separates manufacturer claims from verified results. Our review policy: #ProductReviews

Sep 18, 2026 · 10:03 AM PT

View on XRead the review policy
TVG Report infographic over a 3D-printing workbench highlighting first-layer, profile, and fit checks before adjusting and reprinting

You can lose an evening to a drifting first layer, a bad profile, or a part that prints cleanly and still does not fit. TVG Report looks past headline speeds to the checks, tradeoffs, and repair paths makers actually need. #3DPrinting

Sep 17, 2026 · 10:18 AM PT

View on XExplore Maker Culture
DS18B20 debugging infographic showing the 85.0°C power-on value, a three-wire probe, and checks for conversion, CRC, and power

A DS18B20 at exactly 85°C may be power-on data—not heat. Trust it after conversion completes and CRC passes. Our guide maps power mode and w1_therm checks.

Sep 16, 2026 · 3:54 PM PT

View on XRead the DS18B20 guide
Follow TVG Report on X

Latest Posts

Raspberry Pi 5: choose power for devices, cooling for sustained work

Raspberry Pi 5: choose power for devices, cooling for sustained work

October 18, 2026October 19, 2026

Set DRV8871 Current Limit Without Confusing Peak and Continuous Current

Set DRV8871 Current Limit Without Confusing Peak and Continuous Current

October 17, 2026October 17, 2026

Calibrate PCF8523 RTC Drift and Check Backup Failures First

Calibrate PCF8523 RTC Drift and Check Backup Failures First

October 17, 2026October 17, 2026

GitHub License Compliance Goes GA as a Merge-Time Ruleset

GitHub License Compliance Goes GA as a Merge-Time Ruleset

October 17, 2026October 17, 2026

Adafruit LSM6DSOX six-degree-of-freedom inertial sensor breakout

LSM6DSOX FIFO Overruns: Set the Watermark From Your Drain Time

October 16, 2026October 16, 2026

Adafruit MAX31865 RTD PT100 or PT1000 amplifier breakout

MAX31865 RTD Readings Wrong? Check Reference Resistance and Lead Wiring

October 16, 2026October 16, 2026

GitHub code scanning alert with the Assign to Copilot control

GitHub Agentic Autofix Goes GA, but Validation Still Has Boundaries

October 16, 2026October 16, 2026

INA260 Alert Arrives Late? Calculate the Averaging Delay

INA260 Alert Arrives Late? Calculate the Averaging Delay

October 15, 2026October 15, 2026

MCP9808 Alert Pin Chatter? Match Hysteresis to Conversion Time

MCP9808 Alert Pin Chatter? Match Hysteresis to Conversion Time

October 15, 2026October 15, 2026

GitHub Actions Workflow Lockfiles Pin Direct and Transitive Dependencies

GitHub Actions Workflow Lockfiles Pin Direct and Transitive Dependencies

October 15, 2026October 15, 2026

TCS34725 Color Readings Drift? Control Gain, Exposure and Illumination

TCS34725 Color Readings Drift? Control Gain, Exposure and Illumination

October 14, 2026October 14, 2026

Seeed Studio reCamera Pro Review Preview: The Integration Is the Test

Seeed Studio reCamera Pro Review Preview: The Integration Is the Test

October 14, 2026October 14, 2026

TVG Report

  • About TVG
  • Press Room / Media Kit
  • Event Coverage
  • Follow @TVGReport on X

Editorial Standards

  • Review Policy
  • Corrections Policy
  • Ethics & Editorial Disclosure

Business & Legal

  • Advertise & Sponsor
  • Privacy Policy
  • Terms of Service
Copyright © 2026 TVG Report.
Powered by WordPress and HitMag.